Pinedale Online!
www.PinedaleOnline.com
www.Pinedale.com

Pinedale on the Web!
Pinedale, Wyoming

Home | Calendar of Events | Photo Gallery | Local Businesses |

Pinedale Online > News > November 2018 > BLM replaces damaged culvert, reopens Bird Canyon Road

Culvert repair. Photo by Bureau of Land Management.
Culvert repair
Photo courtesy BLM
BLM replaces damaged culvert, reopens Bird Canyon Road
by Bureau of Land Management
November 12, 2018

The Bureau of Land Management (BLM) replaced a collapsed culvert and reopened the access road in Bird Canyon in Sublette County, Nov. 7. The culvert was badly damaged and compromised the safety of vehicles traveling on the road. For public safety, the BLM immediately closed the road, Oct. 24.

Contractors for Urban Oil and Gas Group, LLC completed the repairs on Oct. 28, including replacing the damaged culvert and re-contouring the road surface. BLM personnel inspected the repairs and reopened the road for public use. As always the general public and industry personnel are advised to use caution when traveling in the back country.

The culvert is located on a main road at an ephemeral stream crossing up Bird Canyon on the east side of the Upper Green River on BLM Rock Springs Field Office managed land. The damage was discovered in October 2018 during an inventory for the BLM Pinedale Field Office watershed restoration project in the LaBarge project area.

The BLM is committed to keeping public landscapes healthy and safe for public use. Please call the BLM Rock Springs Field Office at 307-352-0256 to report damaged roads or other hazards on public land in the area. To learn more about BLM Wyoming, visit https://www.blm.gov/wyoming.


Pinedale Online > News > November 2018 > BLM replaces damaged culvert, reopens Bird Canyon Road

Pinedale Online!
Pinedale Online! PO Box 2250, Pinedale, WY 82941
Phone: (307) 360-7689 , Fax: (307) 367-2864

Office Outlet in Pinedale, 43 S. Sublette
E-mail:support@pinedaleonline.com

Copyright © 2018 Pinedale Online. All rights reserved.
Pictures and content cannot be used in whole or part without permission.